How do I get the child lock off my Beko washing machine?

If you notice a padlock symbol on the display of your Beko washing machine, it means that the child lock function has been turned on. This can be turned off, by pressing the second and fourth (left to right) auxiliary buttons at the same time for three seconds.

Can’t open door on Beko washer?

If there is water in the drum, run a spin and drain programme. Once this is finished the door should release, allowing you to remove your clothing inside. If this all seems fine, you will need to clean the filter pump. To do this, locate the filter on the bottom right-hand side of the appliance.

How do I unlock my automatic washing machine?

Turn the washing machine off and unplug it.



If you’re in the middle of a cycle, turn the dial or press the button to pause or end the cycle. Wait 5-6 seconds to see if the door unlocks. If it doesn’t, turn the machine off by pressing the button or turning the dial all of the way to the off position.

Where is the error code on a Beko washing machine?

The Beko error code system is very simple it goes from E1 to E18, if you can correct the error yourself then you’ll simply need to hold down the start button to clear the error code.

IT IS INTERESTING:  Do newborns have blink reflex?

How do you get child lock off defy washing machine?

Press and hold Auxiliary Function button 2 for 3 seconds. In the programme selection display on the panel, “Child lock enabled” light will turn off.

Does Hoover washing machine have child lock?

programme and option buttons you require, press the Start Pause button. Press the Child Lock button in order to lock the control panel. locked and further changes can now be made.

How do I activate child lock?

Set up parental controls

  1. Open the Google Play app .
  2. At the top right, tap the profile icon.
  3. Tap Settings Family. Parental controls.
  4. Turn on Parental controls.
  5. To protect parental controls, create a PIN your child doesn’t know.
  6. Select the type of content you want to filter.
  7. Choose how to filter or restrict access.

How do I unlock a Beko washing machine?

If you notice a padlock symbol on the display of your Beko washing machine, it means that the child lock function has been turned on. This can be turned off, by pressing the second and fourth (left to right) auxiliary buttons at the same time for three seconds.

Why is my Beko washing machine not draining?

The hose between your machine and the drain shouldn’t be bent or clogged. Check the hose, and unclog or straighten it if necessary. Otherwise, the water may not be removed from the drum completely. If there are no problems in the pump filter or the drain hose, the drained water might be returning to the drum.

Why can’t I open my washing machine?

Turning off the machine at the mains should allow the door lock to cool down and open after a few minutes. … The most common cause is water left in machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray).

IT IS INTERESTING:  Why do overtired babies fight sleep?
Small miracle